HOME > Products > WP1200 > Selection Guide WP1200 > Pump tube type/Tube size(mm) WP1200

WP1200 Pump tube type: Material & Tube size

wp1200_guide02_img00.jpg

Pump tube type: Material (Selectable according to fluid type)

Tube type Product Description Regulately compliance/meets
PHARMED BPT
WPM チューブセレクト P

*Great resistant to general chemicals, acid, alkali and oxidizing agents
*Compatible with virtually all commercial cleaners and sanitizers
*Lasts up to 30 times longer than silicone tubes.

FDA 21 CFR Part 177.2600
USP Class VI
Norprene A-60-G
wp1000_guide02_img05.jpg

*Lasts and perform better than EPDM and other speciality rubber tubes
*Ozone and UV Light resistant
*Applicable to soap and disinfectant dispensing, printing ink transfer, and etc…

-
Norprene A-60-F
wp1000_guide02_img06.jpg
*Food process tube for critical processing applications in the food, dairy and cosmetic industries.
*Compatible with virtually all commercial cleaners and sanitizers
*Great resistant to general chemicals, acid, alkali and oxidizing agents
FDA 21 CFR Part 177.2600
NSF 51
3-A

Note: Pharmed, Norprene are manufactured by Saint-Gobain Group.

 

 

Flow amount benchmark (flow amount per rotation)
Tube inner diameter (mm) 7.9 8
Available tube material N, NF P
Wall Thickness (mm) 2.38 2.0
Flow amount (ml/rev) 5.9 5.25
Caution:

The above table describes the initial benchmark flow amounts during water suction. This may vary considerably depending on the tube type, use period, ambient temperature, and lot tolerances, etc.

Measure the specifications with reasonable leeway.

page top